The drawing block or multiple drawing system forms the heart of every concrete reinforcing steel wire line. We use cold rolling tools instead of drawing dies to enable high efficiency, which are also supported by the following automated wire handling systems.
Cold rolled / cold ribbed
| MODEL | Inlet (mm) | Capstain Diameter (mm) | Speed (m/s) |
| KEB 5000 – Vertical drawing machine | 5.5 - 16.0 | 700 | 12 |
| KHB 5000 – Horizontal drawing machine | 5.5 - 16.0 | 700 | 12 |
Hot rolled stretching unit
System for continuous stretching of hot rolled material, Machine frame of MSH profile. Noise suppressive machine house with connection for fine dust extraction, consisting of 4 rigidly fitted support rolls and 3 water cooled bending rolls, adjustable by means of screw jacks. Support and bending rolls are equipped with quick -change tungsten carbide rings. Greasing of all rolls via central greasing unit.
| MODEL | Inlet Diameter (mm) | Speed (m/s) |
| KBR 16 – Streching unit | 5.5 - 16.0 | 10 |
KSG 16 – S-roller gantry
V-shape capstan dia. 800 mm, V-shape pulleys, C60 material, flame-hardened, mounted with hub straight onto gear shafts, guiding rolls and guiding rails of tungsten carbide , wire-break switch by means of ring sensor.
| MODEL | Inlet Diameter (mm) | Speed (m/s) |
| KSG 16 – S-roller gantry | 6.0 - 16 | 10 |
Semi or automatic spoolers
Spoolers work in combination with wire drawing machines and are used to take-up drawing wires onto rigid or automatic spools.
| MODEL | Inlet Diameter | Speed (m/s) |
| KSS 1250 A/M – Spooler | 4.0 - 14.0 | 10 |
| KSS 1400 A/M – Spooler | 5.0 - 16.0 | 10 |
Coil discharging swilling
Coil discharging systems in reinforcing steel lines serve to a fully automatic discharge of finished coils. The column type swilling system offers the possibility of discharging two parallelly installed lines with one system.
| MODEL | Speed (m/s) |
| KCE – Coil discharging swilling | 10 |
KCE-L – Coil discharging linear
Linear systems in reinforcing steel lines serve to a fully automatic discharge of finished coils. The travel movement of the system is linear. One system is provided for each production line and bears the advantage compared to the swilling type that dead times due to production are avoided. The installation is on floor, a separate foundation is not required.
| MODEL | Speed (m/s) |
| KCE-L – Coil discharging linear | 0.5 |
Automatic strapping system
| MODEL |
| KAB – Automatic strapping system |
Feeding
| MODEL |
| DEZ-1 – Feeding device |