A wire pay-off ensures that things start well on every drawing line. We offer suitable systems for different wire types, diameters, coil weights and coil conditions.
Vertical Pay-offs
Vertical Pay-offs
ÜKA-1
Wire rod overhead pay-off
Pay-off tower, 2 hydraulical tiltable cones.
| Tower height: | 6,0 – 8,0 m |
| Inlet dia. lc (mm): | 5.5-13.5 |
| Drawing speed (m/s): | max. 10.0 |
ÜKA-2
Wire rod overhead pay-off
Pay-off tower, 2 hydraulical tiltable cones, loop accumulator, special inlet funnel with straightening unit, rod hold down device for optimized pay-off performance.
| Tower height: | 6,0 – 8,0 m |
| Inlet dia. lc (mm): | 5.5-13.5 |
| Drawing speed (m/s): | max. 10.0 |
ÜKA-2D
Wire rod overhead pay-off
Pay-off tower, 2 hydraulical tiltable cones.
| Tower height: | 7,0 – 8,0 m |
| Inlet dia. lc (mm): | 5.5-8.0 |
| Drawing speed (m/s): | max. 10.0 |
ÜKA-1/65
Wire rod overhead pay-off
Pay-off tower, 2 hydraulical tiltable cones.
| Tower height: | 6,0 m |
| Inlet dia. lc (mm): | 5.5-6.5 |
| Drawing speed (m/s): | max.6.0 |
Horizontal Pay-offs
HA-F/2
Wire rod horizontal pay-off
Horizontal loading beam, driven pay-off flyer, integrated coil transporting unit
| Inlet dia. lc (mm): | 6.5-16.0 |
| Drawing speed (m/s): | max. 1.5 |
KAM
Wire rod pay-off
The wire pay-off and pre-straightening unit is suitable to take up wire rolls of max. 3.000 kg, to bend up and straighten the wire and to feed it to a further processing machine downstream. This unit can be equipped with one or two pay-off rolls.
| Tower height: | 10.0-50.0. |
| Inlet dia. lc (mm): | 10.0-50.0 |
| Drawing speed (m/s): | max. 2.5 |
KWA
Wire rod pay-off
Horizontal pay-off system for reinforcing steels, especially developed for wire diameter > 12 mm. These pay-off systems stand out for their high robustness and operating facility.
| Inlet dia. lc (mm): | 10.0-16.0 |
Spool Pay-offs
KSA-1000
Horizontal pay-off system for flat spools
| Inlet dia. lc (mm): | 1.0 – 5.0 |
Horizontal Pay-offs
Horizontal Pay-offs
Spool Pay-offs
Vertical Pay-offs
Horizontal Pay-off
HA-F/2
Wire rod horizontal pay-off
horizontal loading beam, driven pay-off flyer, integrated coil transporting unit
| Inlet dia. lc (mm): | 6.5-16.0 |
| Drawing speed (m/s): | max. 1.5 |
KAM
Wire rod horizontal pay-off
horizontal loading beam, driven pay-off flyer, integrated coil transporting unit
| Tower height: | 10.0-50.0. |
| Inlet dia. lc (mm): | 10.0-50.0 |
| Drawing speed (m/s): | max. 2.5 |
KWA
Wire rod pay-off
horizontal loading beam, driven pay-off flyer, integrated coil transporting unit
| Inlet dia. lc (mm): | 10.0-16.0 |
Spool Pay-offs
Horizontal Pay-offs
Horizontal Pay-offs
Spool Pay-offs